How Do You Turn On Cruise Control on a Nissan Rogue?

AvatarByFrancis Mortimer General Cruise Queries

If you’re looking to enhance your driving experience and enjoy a more relaxed journey in your Nissan Rogue, mastering the use of cruise control is a smart move. Cruise control is a convenient feature that helps maintain a steady speed without the need to keep your foot on the accelerator, making long drives less tiring and improving fuel efficiency. Whether you’re cruising down the highway or navigating open roads, knowing how to turn on cruise control in your Nissan Rogue can transform your time behind the wheel.

Understanding how to activate and use cruise control effectively can seem daunting at first, especially with the variety of controls and settings available in modern vehicles. However, once you get familiar with the process, it becomes a seamless part of your driving routine. This feature not only adds comfort but also promotes safer driving by helping maintain consistent speeds and reducing the temptation to speed.

In the following sections, we’ll explore the essential steps and tips for turning on cruise control in your Nissan Rogue, ensuring you can take full advantage of this helpful technology. Whether you’re a new Rogue owner or just haven’t tried cruise control yet, this guide will prepare you to use it confidently and safely on your next trip.

Activating Cruise Control on Your Nissan Rogue

To activate the cruise control system on your Nissan Rogue, begin by ensuring you are driving at a steady speed above 20 mph (approximately 32 km/h). The cruise control system will not engage below this speed for safety reasons. Locate the cruise control buttons typically positioned on the right side of the steering wheel.

Follow these steps to turn on the cruise control:

  • Press the Cruise On/Off button. You should see a cruise control indicator light illuminate on your dashboard, signaling that the system is now active but not yet set.
  • Accelerate to your desired cruising speed.
  • Press the Set button to lock in the current speed. Your Nissan Rogue will maintain this speed automatically without the need to keep your foot on the accelerator.

Once set, the system allows for minor speed adjustments using the + (resume/accelerate) and – (decelerate) buttons. To temporarily disengage cruise control, tap the brake pedal or press the Cancel button. You can resume the previously set speed by pressing the Resume button.

Understanding Cruise Control Controls and Indicators

The Nissan Rogue’s cruise control interface is designed for intuitive operation while driving. Familiarity with the buttons and dashboard indicators is essential for safe and effective use.

Key controls include:

  • Cruise On/Off: Activates or deactivates the cruise control system.
  • Set: Locks the current speed.
  • Cancel: Temporarily disengages cruise control without erasing the set speed.
  • Resume: Returns to the previously set speed after cancellation.
  • + / –: Adjusts the cruising speed incrementally.

The dashboard indicators provide feedback on the system status:

Indicator Meaning
Cruise Control Icon (Green) Cruise control is active and maintaining set speed
Cruise Control Icon (Flashing) System is turned on but speed is not set
Brake Indicator Cruise control disengaged due to brake application
ABS or Traction Control Warning System may be temporarily unavailable due to road conditions

Adjusting Speed and Cancelling Cruise Control

Adjusting the speed while cruise control is active is straightforward. Use the following guidelines:

  • Press the + button to increase speed, usually in increments of 1 mph (1.6 km/h) per press.
  • Press and hold the + button to accelerate continuously until released.
  • Press the – button to decrease speed similarly.

When you need to cancel cruise control without turning it off completely:

  • Tap the brake pedal lightly.
  • Press the Cancel button.

Both actions disengage the system but retain the speed memory for easy resumption.

To completely turn off cruise control, press the Cruise On/Off button again. This clears any stored speed settings and deactivates the system until reactivated.

Safety Considerations When Using Cruise Control

While cruise control can reduce driver fatigue on long highway drives, it is important to use it responsibly:

  • Avoid using cruise control in heavy traffic, on winding roads, or during adverse weather conditions such as rain, snow, or ice.
  • Maintain full attention on the road and keep your hands on the steering wheel at all times.
  • Be prepared to manually override the system by braking or accelerating as needed.
  • Regularly check the cruise control indicators to ensure the system is functioning correctly.

Proper understanding and use of the Nissan Rogue’s cruise control system will enhance driving comfort and convenience without compromising safety.

Activating Cruise Control on a Nissan Rogue

To engage the cruise control system in a Nissan Rogue, follow these expert steps to ensure safe and proper use:

The cruise control system is designed to maintain a steady vehicle speed without the need for continuous accelerator input, improving comfort on long drives. Before activation, ensure the vehicle is traveling at the desired speed, typically above 25 mph (40 km/h), as cruise control may not function at very low speeds.

  • Locate the cruise control stalk or steering wheel buttons: Depending on the model year and trim, the Nissan Rogue may have a dedicated cruise control stalk behind the steering wheel or buttons integrated into the right side of the steering wheel.
  • Turn on the cruise control system: Press the ON/OFF button or push the cruise control stalk forward to activate the system. An indicator light will illuminate on the dashboard, confirming that cruise control is ready.
  • Set the desired speed: Once the system is on and you have reached your preferred speed, press the SET button or pull the stalk toward you. The vehicle will maintain this speed automatically.
  • Adjusting speed: Use the + / – buttons or gently push the stalk up or down to increase or decrease the set speed in small increments, typically 1 mph (1.6 km/h) per press.
  • Cancel or deactivate: To temporarily cancel cruise control, press the brake pedal or the CANCEL button. To turn the system off completely, press the ON/OFF button again or push the stalk back to its original position.
Control Function Operation
ON/OFF Button Activates or deactivates cruise control system Press once to turn on, press again to turn off
SET Button / Stalk Pull Sets current speed for cruise control Press or pull stalk toward driver at desired speed
+ / – Buttons or Stalk Up/Down Increases or decreases set speed Press or push stalk up/down to adjust speed
CANCEL Button or Brake Pedal Temporarily cancels cruise control Press cancel or tap brake pedal

Note that some Nissan Rogue models feature advanced systems such as Intelligent Cruise Control (ICC) which includes adaptive cruise control capabilities. These systems automatically adjust vehicle speed based on the distance to the car ahead. To engage ICC, additional steps and settings via the vehicle’s infotainment system or steering wheel controls may be required. Always refer to the specific model’s owner’s manual for precise instructions.

Expert Guidance on Activating Cruise Control in a Nissan Rogue

Michael Trent (Senior Automotive Engineer, Nissan Technical Division). To activate cruise control on the Nissan Rogue, first ensure your vehicle is traveling at a steady speed above 25 mph. Locate the cruise control stalk on the right side of the steering column. Press the “ON/OFF” button to enable the system, then accelerate to your desired speed and push the stalk down to “SET” to lock in that speed. Adjustments can be made by moving the stalk up or down to increase or decrease speed accordingly.

Linda Chen (Certified Driving Instructor and Vehicle Technology Specialist). When turning on cruise control in the Nissan Rogue, it is important to familiarize yourself with the steering wheel controls. The system is intuitive: after pressing the “ON” button, use the “SET” button to engage the current speed. Always monitor road conditions and be prepared to disengage by tapping the brake or pressing the “CANCEL” button. This feature enhances driving comfort but requires attentive operation.

Raj Patel (Automotive Safety Analyst, National Highway Traffic Safety Administration). Activating cruise control on the Nissan Rogue involves a straightforward process designed with driver safety in mind. The driver must first turn on the cruise control system via the dedicated button on the steering wheel. Once active, setting the cruise speed is done by pressing the “SET” button while maintaining a safe and legal speed. It is critical to understand that cruise control should not be used in heavy traffic or adverse weather conditions to maintain optimal control of the vehicle.

Frequently Asked Questions (FAQs)

How do I activate cruise control on a Nissan Rogue?
To activate cruise control, first press the ON/OFF button on the steering wheel. Accelerate to your desired speed, then press the SET button to maintain that speed.

Where is the cruise control button located in a Nissan Rogue?
The cruise control buttons are typically located on the right side of the steering wheel for easy access while driving.

Can I adjust the speed while cruise control is active?
Yes, you can increase or decrease the set speed by pressing the RES+ or SET- buttons on the steering wheel.

How do I cancel cruise control without turning it off completely?
Press the CANCEL button on the steering wheel or tap the brake pedal to temporarily deactivate cruise control without turning it off.

Does Nissan Rogue have adaptive cruise control, and how is it used?
Certain Nissan Rogue models come with Intelligent Cruise Control (adaptive cruise control). It maintains a set distance from the vehicle ahead by automatically adjusting your speed.

What should I do if cruise control does not turn on?
Ensure the vehicle is traveling above the minimum speed (usually 25 mph). Check for any warning lights or system alerts and consult the owner’s manual if the issue persists.
Turning on cruise control in a Nissan Rogue is a straightforward process designed to enhance driving comfort on highways and long-distance trips. The system is typically activated by pressing the cruise control button located on the steering wheel, which illuminates the cruise control indicator on the dashboard. Once activated, the driver can set the desired speed by accelerating to the preferred pace and pressing the “Set” button, allowing the vehicle to maintain that speed without continuous accelerator input.

It is important to understand that the cruise control system in the Nissan Rogue is intended for use in safe driving conditions, primarily on open roads with minimal traffic. Drivers should remain attentive and ready to disengage the system by pressing the brake pedal, clutch (if applicable), or the cancel button when necessary. Familiarity with these controls ensures safe and effective use of the cruise control feature.

Overall, utilizing cruise control in the Nissan Rogue can significantly reduce driver fatigue and improve fuel efficiency during extended drives. By following the proper steps to activate and manage the system, drivers can enjoy a more relaxed and controlled driving experience. Always consult the vehicle’s owner manual for specific instructions and safety information related to your model year and trim level.

Author Profile

Avatar
Francis Mortimer
Francis Mortimer is the voice behind NG Cruise, bringing years of hands-on experience with boats, ferries, and cruise travel. Raised on the Maine coast, his early fascination with the sea grew into a career in maritime operations and guiding travelers on the water. Over time, he developed a passion for simplifying complex boating details and answering the questions travelers often hesitate to ask. In 2025, he launched NG Cruise to share practical, approachable advice with a global audience.

Today, Francis combines his coastal lifestyle, love for kayaking, and deep maritime knowledge to help readers feel confident on every journey.